2
Entering the addresses directly
"Direct input" refers to the operation of directly inputting the destination ad-
dress from the machine's control panel.
The following procedure describes how to directly specify an address.
1
Press the [Scan] key on the control
panel.
The scan mode screen appears.
2
Touch [Direct Input], then [Scan to FTP].
A screen for entering the destination host name, destination folder, and
other information appears.
Why is the direct input tab not displayed?
?
% If the [Manual Destination Input] on the security details screen (dis-
played by touching [9 Security Setting] on the administrator setting
screen) is set to [Restrict], the direct input tab does not appear.
2-30
Scanning documents
C450