Environment Required For Using The Scan Functions - Konica Minolta bizhub C450 Network Scanner Operations

Before using the scan functions
1 Before using the scan functions
1.1

Environment required for using the scan functions

The following conditions are required to use the network and scanning func-
tions of this machine.
- The machine is connected to the network.
The functions can be used over a TCP/IP network. For details on the con-
nection, refer to "Connecting to the network" on page 1-12. Also, net-
work parameters such as the IP address of this machine must be
specified in order to use the machine on the network. For details, refer to
"Settings for using network/scanning functions" on page 1-9.
- The driver software is installed on the computer.
In order to use this machine as a scanner, the dedicated KONICAMINOL-
TA C450 TWAIN must be installed. For details, refer to "5 Importing im-
ages using TWAIN".
C450
1
1-3