Support Operation - Konica Minolta bizhub C450 Network Scanner Operations

3
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the utility mode
by touching [Close] in each screen until the screen for the copy, fax, scan
or box mode appears.

Support operation

Specify whether each function is supported in IPP communication.
OFF: Responds as not supported.
ON: Responds to communication. No response is returned for "Cancel Job",
"Open Job", and "Open Job Attributes".
1
On the IPP setting screen, touch [Support Operation].
The support operation screen appears.
2
Touch [ON] or [OFF] for each item.
3
Touch [OK].
The operation support information is set.
Note
To cancel changes to the setting, touch [Cancel].
3-54
Specifying settings from the control panel
C450