Netware Settings; Netware Parameters - Konica Minolta bizhub C450 Network Scanner Operations

3
3.10

NetWare settings

The settings for using the machine on a NetWare network can be specified.

NetWare parameters

The NetWare settings are as follows:
NetWare setting screen 1/4
Item
NetWare Setting
Ethernet Frame Type
Operating Mode
Status
Note
The IPX protocol is not disabled even if NetWare setting is set to [OFF].
NetWare setting screen 2/4
Item
Print Server Name
Print Server Password
Polling Interval
NDS/Bindery Setting
NetWare setting screen 3/4
Item
File Server Name
NDS Context Name
3-48
Specifying settings from the control panel
Description
Specify whether to turn ON the NetWare print settings.
Sets the frame type that is used for communications.
Sets the operating mode.
NetWare Status can be verified. For details on specifying
the settings, refer to "Status" on page 3-52.
Description
Sets the printer server name. Use the keyboard that
appears in the touch panel to type in the server name (up
to 63 characters).
Sets the password that is required when the print server
logs in to the file server. Use the keyboard that appears in
the touch panel to type in the password (up to 63
characters).
Sets the interval for searching the print queue. To change
the interval, press the [C] (clear) key, and then use the
keypad to type in the value (between 1 and 65535).
If bindery is disabled, only NDS is enabled. If bindery is
enabled, both NDS and bindery are enabled.
Description
Sets the file server name to which the print server logs in.
Use the keyboard that appears in the touch panel to type in
the server name (up to 47 characters).
Sets the NDS context name. Use the keyboard that
appears in the touch panel to type in the NDS context name
(up to 191 characters).
C450