3
3.23
PSWC settings
The use of PageScope Web Connection can be enabled or disabled.
!
Detail
Refer to "Items that can be specified using PageScope Web Connection"
on page 4-2 for details on PageScope Web Connection.
To specify PSWC settings
1
In the administrator setting screen, touch [5 Network Setting]. (Refer to
page 3-7 for more details.)
2
In the network setting screen, touch [9 Detail Setting].
3
In the detail setting screen, touch [5 PSWC Setting].
The PSWC Setting screen appears.
4
Touch [Enable] or [Disable].
5
Touch [OK].
The use of PageScope Web Connection is enabled or disabled.
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the utility mode
by touching [Close] in each screen until the screen for the copy, fax, scan
or box mode appears.
3-102
Specifying settings from the control panel
C450