Konica Minolta bizhub C450 Network Scanner Operations page 151

Specifying settings from the control panel
Note
The registration cannot be completed unless a setting is specified for
"Text".
!
Detail
To check the registered setting, touch the button for the desired text, and
then touch [Details].
To change the registered setting, touch the button for the desired text,
and then touch [Edit].
To delete the registered setting, touch the button for the desired text, and
then touch [Delete].
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the utility mode
by touching [Close] in each screen until the screen for the copy, fax, scan
or box mode appears.
!
Detail
For the procedure to enter characters, refer to "Entering text" on
page 7-5.
C450
3
3-31