To Search The Destination - Konica Minolta bizhub C450 Network Scanner Operations

Scanning documents

To search the destination

1
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to "Specifying the scan set-
tings" on page 2-46.
2
After specifying the settings, touch [OK].
3
Load the document into the ADF or position it on the original glass of
the machine.
4
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
C450
2
2-17