Konica Minolta bizhub C450 Network Scanner Operations page 144

3
5
Touch [Destination].
– Touch the desired button, and then select the destinations to be
registered.
– Up to 100 groups can be registered. Up to 500 destinations can be
registered to one group.
6
Touch [Close].
– To check the registered destinations, touch [Check Setting].
– The registration cannot be completed unless a setting is specified
for "Remote Destination".
7
Touch [OK].
The group destination is registered.
!
Detail
To check the registered destination, touch the button for the destination,
and then touch [Check Setting].
To change the registered destination settings, touch the button for the
desired destination, and then touch [Edit].
To delete the registered destination, touch the button for the desired des-
tination, and then touch [Delete].
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the utility mode
by touching [Close] in each screen until the screen for the copy, fax, scan
or box mode appears.
!
Detail
For the procedure to enter characters, refer to "Entering text" on
page 7-5.
3-24
Specifying settings from the control panel
C450