Konica Minolta bizhub C450 Network Scanner Operations page 188

3
5
Touch [OK].
The LDAP function is set.
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the utility mode setting, touch [Exit] in the sub display
area. Otherwise, cancel the utility mode by touching [Close] in each
screen until the screen for the copy, fax, scan or box mode appears.
Reminder
If the LDAP server settings are not specified correctly, network failure
may occur. The server administrator should specify LDAP settings.
3-68
Specifying settings from the control panel
C450