Resetting The Printer; Downloading Firmware And Fonts - Datamax E-Class Mark II Maintenance Manual

Hide thumbs Also See for E-Class Mark II:

Table of Contents

2. While the labels print, turn the Printhead Adjustment Screw until optimum print quality is

obtained.

Printhead

Assembly

Note: Never over-tighten the Printhead Adjustment Screw; damage can result. Also, if thermal

transfer equipped, use the opening in the Ribbon Handler Assembly to access the screw.

2.5 Resetting the Printer

To return the printer to factory default settings proceed as follows:

Turn ON the printer, and then while all 3 lights are ON, press and hold the

all lights turn OFF.

The firmware application and fonts are stored in Flash memory. These files can be updated as newer

version become available, as follows:

1. Identify the new version for the model of the printer at

download that file onto your computer's hard drive.

2. Connect the printer to the host and then, using the DOS copy command, enter:

2-8

rinthead

Adjust

ment

Screw

Maintenance and Adjustments

http://www.datamax-oneil.com

Buttons until

then

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the E-Class Mark II and is the answer not in the manual?