Table of Contents
Advertisement
Print Definitions—DP2
A-61097
May 1997
This mode defines the information printed on each document, based upon
the document level. The default values are Nothing Printed for Level 0
documents; Full Image Address with all delimiters for Level 1, Level 2, and
Level 3 documents.
Microimager 70
Scanner 923
If the same information is to be printed on documents of all levels:
1. Select Same Format per Level.
Current Print Sequence Display Values
New Print Sequence Display Values
2. Select the item(s) to be printed, in turn, up to a maximum of thirty-
eight (38) characters, including spaces.
NOTE: If the definition exceeds the thirty-eight (38) character limit, the
first thirty-eight (38) characters will be printed on each document
and the remainder of the information will be truncated.
If Spaces between Items is selected, you must select the desired number
of spaces.
Microimager 70/AFM
Scanner/Microimager 990
Scanner 900
Scanner 9500
Print Items
Full IA w/No Delimiters
Full IA w/FF Delimiter
Full IA w/All Delimiter
Fixed Field Only
Indexed Fields Only
Current Field Level
Spaces between Items
Current Day
Current Date
Current Time
Document Counter
Roll Number
Message 1-9
Check Digit
Nothing Printed
Previous Menu
3-93
Advertisement
Table of Contents
