Table of Contents
Advertisement
Code
Function Code Name/Description
†
F12
Level 2 Count
Allows you to display the total number of documents
assigned Level 2. Also allows you to reset the count
to zero.
†
F13
Level 3 Count
Allows you to display the total number of documents
assigned Level 3. Also allows you to reset the count
to zero.
F14
Reset Level Counts
Allows you to reset all counters (Level 0, Level 1,
Level 2, Level 3, and Total) to zero.
F15
Alarm Volume
Allows you to adjust the volume of the alarm.
F16
Alarm Tone
Allows you to adjust the pitch of the alarm tone.
†
F17
Elapsed Time
Allows you to display the number of hours the motor,
transport, and AC have been running, in addition to
the non-resettable document count.
F18
Display Contrast
Allows you to adjust the contrast of the Status
Display.
F19
Display Language
Allows you to choose the language in which the
Status Display messages will appear.
F20
Measurement System
Allows you to choose the measurement system in
which measurements are displayed.
F21***
Change Time
Allows you to change the time.
F22***
Change Date
Allows you to change the date.
†
F23
***
Time and Date Display
Allows you to view the current time and date.
F24*
AEC On/Off
Allows you to turn the Automatic Exposure Control on
or off.
F25*
AEC Auto Adjust
Allows you to adjust the AEC exposure setting when
the AEC is in Auto Mode (ON).
†
May be executed while transport is running.
* Available when filming; for use only with Microimager 70 (with or without AFM), and
Scanner/Microimager 990.
** Available when scanning; for use only with the Scanner 900, Scanner 923, Scanner 9500, and
Scanner/Microimager 990.
*** Available when using advanced capabilities; for use only with the Microimager 70 (with AFM),
Scanner 900, Scanner 923, Scanner 9500, and Scanner/Microimager 990.
B-2
P-Key Definition Input
Required
Optional
f12
f13
f14
f15
f16
f17
f18
f19
f20
f21
f22
f23
f24
,0
off/disabled
,1
on/enabled
f25
A-61097
May 1997
Advertisement
Table of Contents
