Line - Kodak 4C8894 Installation Instructions Manual

Reduction Ratio
A-61097 May 1997
This mode defines the level of magnification. The default value is Don't
Care.
Microimager 70
Scanner 923
1. Select Reduction Ratio.
Mode Number: 10
Mode Configuration
MODE 10 Mode Name
3 Lvl Index Format
Supprs IA Display Format
4233 IA Field Widths
2112 Level Rules
None Batching
Auto AEC Mode
Duplex Film Mode
????? Reduction Ratio
1 Roll # of Cassettes
Comic Film Writer
Off Image Mgmt Code
Off Length Monitor
Off Skew Monitor
Xport Check Stacker
Off Endorser
Not Used
Save & End Session Save & End Session
Previous Menu Previous Menu
2. Select the desired reduction ratio.
Use the following information to determine the reduction allowed
based upon the Film Mode selected:
— If the film mode is Simplex, you may select 50X, 40X, or 24X.
— If the film mode is Duplex, you may select 50X or 40X.
— If the film mode is Duo, you may select 50X or 40X.
NOTE: This selection is not available on the scanners.
Microimager 70/AFM
Scanner/Microimager 990
Mode Name: Mode Name: MODE10 MODE10
Ftswitch Pressed Undef
Ftswitch Released Undef
Ftswitch Cnf Tone Off
Patch Reader 1 Off
Patch Reader 2 Off
Patch Definition Lvl 2
Bar Code Off
Confirmation Tone N N N
OCR Status Off
COIN User Channel On
Printer Control Disply
Primary DP-1 Off
Secondary DP-1 Off
Doc. Printer 12 Off
Document Sorter Off
Mode Overrides No Sav
Film Definition F
Don't Save & End Session Don't Save & End Session
End Configuration End Configuration
Scanner 900
Scanner 9500
Reduction Ratio
Don't Care
24x
40x
50x
Previous Menu
3-21