Table of Contents
Advertisement
A PPEN D IX B : Function Codes
Code
Function Code Name/Description
F01
Select Mode
Allows you to select one of the eighteen (18)
application modes.
F02
Restore Mode
Allows you to restore the current application mode to
its default status (as it was defined at installation),
provided that mode overrides are not saved.
F03*
Filming Only
Allows you to film documents, with no level counting,
endorsing, patch reading, etc.
F04
Counting Only
Allows you to count documents only, with no filming,
scanning, etc.
†
F05
Accessory Status
Allows you to display the current status of each
accessory installed.
†
F06
Terminate Batch
Allows you to prematurely end a batch
†
F07
Level 0
Allows you to assign Level 0 to the next document
fed into the transport.
†
F08
Last Image Address
Allows you to display the Image Address of the last
document processed.
†
F09
Total Document Count
Allows you to display the total number of documents
processed. Also allows you to reset the count to zero.
†
F10
Level 0 Count
Allows you to display the total number of documents
assigned Level 0. Also allows you to reset the count
to zero.
†
F11
Level 1 Count
Allows you to display the total number of documents
assigned Level 1. Also allows you to reset the count
to zero.
†
May be executed while transport is running.
* Available when filming; for use only with Microimager 70 (with or without AFM), and
Scanner/Microimager 990.
** Available when scanning; for use only with the Scanner 900, Scanner 923, Scanner 9500, and
Scanner/Microimager 990.
*** Available when using advanced capabilities; for use only with the Microimager 70 (with AFM),
Scanner 900, Scanner 923, Scanner 9500, and Scanner/Microimager 990.
A-61097
May 1997
P-Key Definition Input
Required
Optional
f01
,xx
2-digit mode number
f02
f03
,0
off/disable
,1
on/enable
,2
toggle
f04
,0
off/disable
,1
on/enable
,2
toggle
f05
f06
f07
f08
f09
f10
f11
B-1
Advertisement
Table of Contents
