Table of Contents
Advertisement
Write Definitions
3-26
This mode defines the information printed on film next to each document,
based upon the document level. The default value for all levels is
<FF/IA-All Del>.
Microimager 70
Scanner 923
When using a Microimager 70 without the Advanced Function Module
installed, a limited number of print items are available. The available print
items are:
• Full Image Address
• Indexed Fields Only
• Nothing Printed
When using a Microimager 70 with the Advanced Function Module
installed, or Scanner/Microimager 990, all print items may be used.
If the same information is to be printed next to documents of all levels:
1. Select Same Sequence per Level.
Current Print Sequence Display Values
<Full IA> <2 Sp> <Date> <2Sp> <Time>
Default is <FF/IA - All Del>
New Print Sequence Display Values
2. Select the item(s) to be printed.
NOTE: If the definition exceeds the thirty-eight (38) character limit, the
first thirty-eight (38) characters will be printed on film next to each
document and the remainder of the information will be truncated.
New information will appear in the New Print Sequence Display
Values box. When you press Enter, the print sequence will appear
in the upper box.
Microimager 70/AFM
Scanner/Microimager 990
Scanner 900
Scanner 9500
FAN Write Sequence
Full Image Address
Indexed Fields Only
Current Field Level
Spaces between Items
Current Day
Current Date
Current Time
Document Counter
Message 1
Message 2
Message 3
Message 4
Message 5
Message 6
Message 7
Message 8
Message 9
Nothing Printed
Previous Menu
A-61097
May 1997
Advertisement
Table of Contents
