Line - Kodak 4C8894 Installation Instructions Manual

Film Mode
A-61097 May 1997
This mode defines the orientation of documents on film. Refer to
Description 5: Film Modes for a description of the available film modes.
The default value is Duplex.
Microimager 70
Scanner 923
1. Select Film Mode.
Mode Number: Mode Number: 10 10
Mode Configuration Mode Configuration
MODE 10 Mode Name
3 Lvl Index Format
Supprs IA Display Format
4233 IA Field Widths
2112 Level Rules
None Batching
Auto AEC Mode
Duplex Film Mode
????? Reduction Ratio
1 Roll # of Cassettes
Comic Film Writer
Off Image Mgmt Code
Off Length Monitor
Off Skew Monitor
Xport Check Stacker
Off Endorser
Not Used
Save & End Session Save & End Session
Previous Menu Previous Menu
2. Select the desired film mode.
NOTE: If you intend to link the current mode with another mode, the film
mode chosen for both modes must be compatible. Simplex mode
is compatible with either simplex mode or duplex mode. Duplex
mode is compatible with either simplex mode or duplex mode.
Duo mode is compatible only with duo mode.
NOTE: Film mode is not available on the scanners.
Microimager 70/AFM
Scanner/Microimager 990
Mode Name: Mode Name: MODE10 MODE10
Ftswitch Pressed Undef
Ftswitch Released Undef
Ftswitch Cnf Tone Off
Patch Reader 1 Off
Patch Reader 2 Off
Patch Definition Lvl 2
Bar Code Off
Confirmation Tone N N N
OCR Status Off
COIN User Channel On
Printer Control Disply
Primary DP-1 Off
Secondary DP-1 Off
Doc. Printer 12 Off
Document Sorter Off
Mode Overrides No Sav
Film Definition F
Don't Save & End Session Don't Save & End Session
End Configuration End Configuration
Scanner 900
Scanner 9500
AEC Status Field
Simplex Mode
Duplex Mode
Duo Mode
Previous Menu
Simplx Duo Duplex
f b
50X
40X 50X 50X
24X 40X 40X
3-19