Dust Bag Cover Replacement; Agitator Cleaning - Kenmore 1T6.31100 Use And Care Manual

{
Hinge
Dust Bag
Chamber -
Hinge Pin
Cover
To reinstall or replace dust bag cover,
1. Affgn dust bag cover hinge pin with
hinge pin hole in dust container°
2_ Rotate dust bag cover into place,
3. You shouldhear a noticeable click
when hinge pin snaps into place°
Dust Beg
Cover
To maintain efficient cleaning, the agita-
tor must be kept free of carpet fiber,
string_ or hair build-upo After every 7 to
10 uses, unplug and turn vacuum cleaner
over and check agitator for fiber and
hair build_up.
Use scissorsto remove any build-up
entangled around the agitator.
I
Always follow all safety precautionswhen
performing maintenance to the vacuum
cleaner_
_WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance lo the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
the vacuum cleaner suddenly starling.
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bag is full or if a filter is clogged.
See DUST BAG REPLACEMENT section°
If the dust bag and filter areas are free of
clogs, check the extension hose.
19