Advertisement
Available languages
Available languages
Check motor safety filter frequently and
change when dirty.
Electrical Shock Hazard
Unplug power cord from electrical
outlet. Do not operate the vacuum
cleaner without the motor safety fil-
ter. Be sure the filter is dry and
properly installed to prevent motor
failure and/or electrical
shock.
Remove the dust bag as outlined in the
DUST BAG REPLACEMENT
section.
MOTOR SAFETY FILTER
(ELECTROSTATIC)
1. The filter must be
replaced when dirty.
It should be replaced
Motor
regularly depending
on use conditions,
The filter CANNOT
be washed as it will
lose its dust
trapping ability.
Note: See PARTS
AND FEATURES
for
motor safety filter number.
2. If the filter,
located in the
bottom of the bag
cavity, is dirty,
remove it by pulling
forward and out
from under the ribs.
3. Replace the
filter, smooth
Motor
(white) side up,
by sliding it back
Fl_
into place under
the ribs in the bag
cavity.
Replace the bag as outlined in the DUST
BAG REPLACEMENT
section.
16
EXHAUST FILTER
(HEPA)
Do not operate without exhaust
filter. Failure to due so may damage
the vacuum cleaner
The exhaust filter cartridge must be
replaced when dirty. It should be replaced
regularly depending on use conditions. The
filter CANNOT be washed as it will lose
its dust trapping ability.
Note: See PARTS AND FEATURES for the
exhaust filter number.
1. Slide the
exhaust filter
cover release
down.
2. Pull out on
exhaust filter
cover to remove
from bag cover.
e.g
/_
Cover.. l/%
Exhaust Filter _
_
Cover Release
FE_i haust
Bag
Exhaust
3. Remove the
exhaustfilter
ca_r_ge
from the
bag coven
4. Replace the
exhaust filter
cartridge, carefully
positioning it so that it
fits into the bag cover.
The black edge of
the filter should be
facing away from
the operator. Push
only on filter cartridge
frame, not on filter itself.
Exhaust Filter
_L
I/
C°:h":'
:"
Eag
Cover-.-_,
Exhaust
5. Replace the
exhaust filter
cover and secure
the latch by
pushing it upward.
Advertisement
