Attachments - Kenmore 1T6.31100 Use And Care Manual

i ATTACHMENTS J
i 'I','T,I',
CAUTION
DO NOT use the hose when vacuum cleaner
handle is tilted back into the floor cleaning
position.
Always return the vaccum cleaner to the
upright position before using the ho_e and
attachments.
Failure to do so may resul! in overheating of
the agitator motor and can cause the thermal
protector to trip
TO USE ATTACHMENTS
1. Place the vacuum cleaner in the
uprlght position.
2. Remove the hose handle and wand by
removing hose handle from hose holder
and lifting up.
Hose
Hose
Hand_
3. Use attachments as needed° See
ATTACHMENT USE TABLE_
FOR ADDITIONAL REACH
Rotate hose
release lever
down to release
hose for
maximum hose
reach.
Hose_
Role
Level
,_ CAUTION
When using atlachments, be careful not Io
overextend the strelch hose when reaching.
Trying Io roach beyond the hose stretch
capability could cause the vacuum cleaner
to tip over°
iiiii1,1,1 uLuii uil,, ii ,L
.......... I
DO NOT pull the vacuum cleaner around I
lho room by the hosed Property damage or I
personal injury could result. I
TELESCOPING WAND
1. The wand length
is adjustable and
requires no ===
T
assembly° To adjust, ==
simply push down
on the wand handle
'V"
and slide the upper
wand to the desired
h tght "
2, Extend wand to
desired length_
COMBINATION BRUSH
The combination brush can be attached
directly to the wand°
o,,o cJ
Use the brush holder without the brush
for greater suction on furniture cushions
or stairs°
Use brush holder with brush for cleaning
loose surfaces such as drapes_
12