Dust Bag Replacement - Kenmore 1T6.31100 Use And Care Manual

1
DUST BAG REPLACEMENT J
/
TO REPLACE DUST BAG
_WARNING ]
Always unplug power cord from electrical!
outlet before performing maintenance to thai
vacuum cleaner. 1
TO REMOVE DUST BAG
1. Pull on the Dust Beg
dust bag cover
latch located
on the side of
the dust bag
cover,,
NOTE: This unit has a bag safety stop
which prevents cover from closing if bag
is missing or not properly installed, Do
not pull on the bag safety stop when
removing/installing the dust bag.
2_ Grasp the
dust bag collar
Bag and pull
Safety Stop gently,
carefully
removing the
dust bag from
the dust bag
Dust Bag holder,
the used dust Dust Bag
bog Do.o, N
reuse dust bag,
Dust Bag :i ' _
and the motor Moto
safety filter for Safety jl_._J./_l
i i ,,,1 i j i1o., t-
CAUTION
NEVER REUSE A DUST BAG_ Very fine
materlals_ such as carpel freshener,
face powder_ fine dust, plaster, soot_
etc. can clog the bag and cause it to
burst before it is full. Change bag
more often when vacuuming these
materials.
Note: See PARTS AND FEATURES for
Bag number°
2. Push dust bag
collar opening
completely over
the dust bag holder
as far as it will go.
3. Tuck the bag into
the dust bag
chamber° Be sure
the bottom and
sides of the dust
bag are completely
within bag cavity
rlor to closing the
ag cover.,
4, Close the bag
cover. You will
hear a distinct snap
when cover is
securely closed°
Check to see that
the dust bag is fully
placed in the bag
chamber,
NOTE: If bag is not installed or not
installed properly the bag safety stop
prevents the cover from closing°
17