Tools - Kenmore 1T6.31100 Use And Care Manual

[
ATTACHMENT ASSEMBLY
HOSE AND WAND
t. insert the tab on
the telescopic wand
into the "J"slot on
the hose handle.
Twist the telescopic
wand to lock in
place.
2. Place the telescop-
ic wand in the wand
holder and route the
hose as shown,
Hose_
Handte_._
"J"
Slot_
Telescopic
Wand
_..__I_1
3. Snap the
hose handle
into the hose
holder located
on the handle
of the vacuum
cleaner_
NOTE. Be sure
the raised
edge of the
hose handle
rests against
edge of the
hose holder.
4_ Rotate the
hose release
lever down
and route the
hose as
shown°
5, Snap the
hose into the Telescopic
hose cuff on
the side of Wand
the vacuum
cleaner Hose
Release
_i_ . Rotate the hose
release lever
upwards to lock
the hose in place.
Do not operate the agitator without thel
wand properly inserted into lhe wandl
holder and the hose handle properlyl
secured in the hose helder I
I
]