Kenmore 1T6.31100 Use And Care Manual page 14

MOTOR PROTECTION SYSTEM
Thermal Protector - Sucllon Motor
This vacuum cleaner has a thermal
protector which automatically trips to
rotect the vacuum cleaner suction motor_
a clog prevents the normal flow of air
to the motor, the thermal protector turns
the motor off automaflcal[y_ This allows
the motor to cool in order to prevent
possible damage to the vacuum cleaner_
Thermal Protector - Agilator Motor
This vacuum cleaner has a thermal
protector which automatically trips to
protect the agitator motor. The thermal
protector turns the motor off
automatically. This allows the motor to
cool in order to prevent possible damage
to the vacuum cleaner.
To reset thermal protector: Turn the
vacuum cleaner off and unplug the power
cord from the outlet to allow the vacuum
cleaner to cool and the thermal protector
to reseh
,_CAUTION
Always return the vaccum cleaner to the
upright position before using the hose and
atlachmentso Failure to do so may resul! in
overheating of lhe agtlator molar and can
cause the thermal protectors to trip,,
Check for and remove clogs, and reptace
bag if necessary_ See CLOG REMOVAL
sectlonr Also check and replace any
clogged fillers. Wait approximately 40-
50 mlnules before reslartlng vacuum
cleaner_
14