Dust Bag Replacement - Kenmore 116.35622 Owner's Manual

Check motor safety filter frequently and
change when dirty.
Electrical Shock Hazard
Unplug power cord from electrical
outlet. Do not operate the vacuum
cleaner without the motor safety
filter. Be sure the filter is dry and
properly installed to prevent motor
failure and/or electrical shock.
Remove the dust bag as outlined in the
DUST BAG REPLACEMENT section.
MOTOR SAFETY FILTER
ELECTROSTATIC
1. This white & grey
filter must be
replaced when dirty.
It should be Motor
SafeW
replaced regularly FilteJ
depending on use
conditions. The ill-
ter CANNOT be
washed as it will
lose its dust trap-
ping ability.
Note: See PARTS AND FEATURES for
motor safety filter number.
Motor
Safety
Filter
2. If the filter,
located in the bot-
tom of the bag
cavity, is dirty,
remove it by
pulling forward out
from under the
ribs.
3. Replace the
filter, smooth
(white) side up, Motor
by sliding it back Safety
into place under
the ribs in the
bag cavity.
Replace the bag as outlined in the DUST
BAG REPLACEMENT section.
!
WARNING
Do not operate without exhaust
filter.
EXHAUST FILTER
HEn
The exhaust filter cartridge must be
replaced when dirty. It should be
g
replaced regularly depending on use
conditions. The filter CANNOT be
washed as it will lose its dust trap-
ping ability.
Note: See PARTS AND FEATURES for
the exhaust filter number.
Slide the
exhaust filter
cover release
down. Pull out
on exhaust fil-
ter cover to
remove from
bag cover.
Bag
Cover---_ "_1
Exhaust Fi.er I_L I J
Cover ReleaserS1 I
Exhaus,
Filter _wJ_\
Cove,_" _4j
Bag
Exhaust
Remove the
exhaust filter car-
tridge from the
bag cover.
Replace the exhaust filter
cartridge, carefully posi-
tioning it so that it fits into
the bag cover. The black
edge of the filter
should be facing away
from the operator. Push
only on filter cartridge
frame, not on filter itself.
--r
Cover Release_
Exhaust _-
F, t or I
Bag
Exhaus
Replace the
exhaust filter
cover and
secure the
latch by push-
ing it upward.
15