Microsoft Windows 98Se/Me - Icom id- rp2000v Instruction Manual

4
DRIVER INSTALLATIONS
■ Microsoft
®
Windows
Select
Select
®
98SE/Me
Click
Click
Click
15
q Start up the Windows.
• Quit all applications if activated.
w Insert the CD supplied with the ID-RP2000V, into
the CD drive.
e Connect the PC and ID-RP2000V [SERVICE T]
connector using with a USB cable
.
chase separately)
r The "Add New Hardware Wizard" will come up as
at left.
Click [Next>].
t When the dialog box as at left is displayed, select
"Search for the best driver for your device. (Rec-
ommended).", then click [Next>].
y Click to add the check mark, "✔," into "Specify a lo-
cation:," then click [Browse...].
NOTE: Remove the check mark, "✔," from
"Floppy disk drive," "CD-ROM drive" and "Micro-
soft Windows Update" to prevent the incorrect
driver selection.
(A-B type; pur-