Web Configuration; Using Web Browser - Planex BLW-54CW3 User Manual

Planex 54mbps wireless broadband router

Hide thumbs Also See for BLW-54CW3:

Table of Contents

2. Web Configuration

The BLW-54CW3 Wireless Router contains an HTTP server. This enables

you to connect the router, and configure it by using your web browser.

Before attempting to configure BLW-54CW3 Wireless Router, please

ensure that your PC can establish a physical connection to the Wireless

Router. The PC and the BLW-54CW3 Wireless Router must be directly

connected with each other (using the LAN ports on BLW-54CW3) or on

the same LAN segment. Besides, the BLW-54CW3 Wireless Router must

be set up and powered on.

The BLW-54CW3 Wireless Router's default IP Address is "192.168.1.1."

If the IP address has already used by another device, the other device must

be turned OFF until BLW-54CW3 is allocated a new IP Address.

To establish a connection between your PC and the BLW-54CW3 Wireless

Router:

1.Start the WEB browser.

Chapter2 Basic Setup & Configuration

Table of Contents