Tcp/Ip Settings; Lan Interface Setup - Planex BLW-54CW3 User Manual

Planex 54mbps wireless broadband router

Hide thumbs Also See for BLW-54CW3:

Table of Contents

4. TCP/IP Settings

This page allows you to configure settings regarding to parameters both for

local area network or Internet network.

This page is used to configure the parameters for local area network which

connects to the LAN port of your Access Point. Here you may change the

setting for IP address, subnet mask, DHCP and so on.

●IP Address: Here is the IP address of the LAN side of BLW-54CW3. It

is usually the default gateway of the client's PC. The default IP

address is "192.168.1.1". Note: If you change the default IP

Address of BLW-54CW3, remember to change the IP Address

accordingly when log on to the BLW-54CW3 Web Configuration.

●Subnet Mask: The Subnet Mask of the LAN side of BLW-54CW3 is "

255.255.255.0". by default.

●Default Gateway: Enter the Gateway address provided by your ISP.

●DHCP: Scroll down the menu to choose either you would like BLW-

54CW3 to be a DHCP Server or a DHCP Client, or you can choose "

Disable" to disable the DHCP function.

◆Server: Choose to enable the built-in DHCP server mode, BLW-

54CW3 will automatically distribute IP addresses to the devices which

send request to it.

Chapter2 Basic Setup & Configuration

Table of Contents