Table of Contents
Advertisement
4.2.4. PPTP
●IP Address：Enter the IP address provided by your ISP.
●Subnet Mask：Enter the Subnet Mask address provided by your ISP.
●Server IP Address：Please enter the VPN Server IP and its Name.
●USER Name：Enter the User Name provided by your ISP. (The ID
must be alphanumeric characters and case sensitive.)
●Password：Enter the Password provided by your ISP. (The password
must be alphanumeric characters and case sensitive.)
●MTU Size: MTU means Maximum Transmission Unit, the largest
physical packet size, measured in bytes, that a network can transmit.
The default value is 1452. Please set up the MTU according to your
system environment. Only enter a new MTU when your ISP requires,
otherwise, please leave it as the default setting. When using PPPoE
connection, you may need to change MTU settings to maintain the
connection with your ISP, however, if the incorrect value was entered,
you may be unable to access certain websites. Reducing the packet size
can help connecting to certain websites or speeding up the transmission
rate.
Chapter2 Basic Setup & Configuration
2
3
Advertisement
Table of Contents
