Table of Contents
Advertisement
Back Panel—Ports
Ports
USB
Internet
Power
Button
Reset
WPS
AP/Router
Use standard LAN cables (RJ45 connectors) to connect
your PCs to these ports.
Any LAN port can be connected with another hub, if
required.
Connect a DSL or Cable Modem to the Internet port and
link to the Internet. If your modem came with a cable, use
the supplied cable. Otherwise, use a standard LAN cable.
Plug the power cord into this port and the other side of the
adaptor should be plugged into the socket.
Function
Reset to default
Build wireless
connection
Shift between two
kinds of modes
Meaning
Usage
Press the button for 10 seconds, and
then unplug the power cord, but
do not release the Reset button and
wait for 3 seconds before plugging
the power cord back. Release the
Reset button and BLW-54CW3 will
automatically restart and back to
the default settings.
P r e s s t h e b u t t o n a n d b u i l d a
connection between BLW-54CW3
and a station (adapter).
Shift between AP and router modes
by switching the switch.
Chapter Introduction of BLW-54CW3
1
5
Advertisement
Table of Contents
