Access Control - Planex BLW-54CW3 User Manual

1.4. Access Control

This page will allow only those whose wireless MAC addresses listed on
the Device List able to connect with BLW-54CW3. The default mode is
that all the wireless stations are allowed to access BLW-54CW3.
●Access Control Mode：Scroll down to enable the Wireless Access
Control function. The default value is Disable.
◆Disable – Choose this function to disable Wireless Access Control
function. This means all the users may connect with BLW-54CW3
without limitation.
◆Allow Listed – Choose this function to let users only whose MAC
addresses were added to the Device List can connect with
BLW-54CW3and eliminate other users.
●MAC address：Enter the MAC address of other wireless devices here.
●Comment：Enter any text to describe the MAC address which you
want to allow.
●Apply Changes：Click this button to save the settings and restart the
router.
●Reset：If there is anything wrong with the settings you made, you can
click "reset" to configure the page again.
●Current Access Control List：This table lists all the devices that are
allowed to connect to BLW-54CW3.
◆Delete Selected：Delete the device you selected from the list.
◆Delete All：Delete all the devices from the list.
◆Reset：Update and refresh all the devices on the list.
Chapter3 Advanced Setup & Configuration
3
63