Table of Contents
Advertisement
5.9. Save/Reload Settings
Before upgrading, you can use this function to save current system
settings or upload the previous settings after upgrading the firmware.
●Save Settings to file
You may click "Save Settings to file" button to save current system
settings to your local disk. (The format will be "*.dat" file)
●Load Settings
Make sure the saved system setting file is in the local host disk and then
click "Browse..." to search for the saved system setting file. Click
"Open" to select the system setting file that you want and then click
"Load Settings from file" to start restore the settings.
Chapter2 Basic Setup & Configuration
2
5
Advertisement
Table of Contents
