Table of Contents
Advertisement
2. Web Configuration
GW-MF54G2 contains an HTTP server. This enables you to connect the router, and configure it by using
your web browser.
The GW-MF54G2 Wireless Router's default IP Address is "192.168.1.100". If the IP address has already
used by another device, the other device must be turned OFF until GW-MF54G2 is allocated a new IP
Address.
Using Web Browser
To establish a connection between your PC and the GW-MF54G2 Wireless Router:
1. Start the WEB browser.
2. In the Address box, enter "http://192.168.1.100" which is the default IP Address of the
GW-MF54G2 Wireless Router. Press "Enter" on your keyboard, and the pop-up will ask you to enter
the User Name and Password to get into the program.
3. Enter the default User Name "admin" and Password "0000" and then click "OK" to enter the
system. You can also put a check in the "Remember my password" check box, and next time you
do not need to enter password to enter the system.
4. After entering the system, GW-MF54G2 will show you the homepage. During configuration, you can
use the links on the top of the page to navigate. Besides, it is necessary that, after configuring, you
should click "Apply" to enable the settings you've made.
Hide quick links:
Advertisement
Table of Contents
