Table of Contents
Advertisement
1.2. Advanced Settings
These settings are only for more technically advanced users who have
a sufficient knowledge about wireless LAN. These settings should not
be changed unless you know what effect the changes will have on your
Access Point.
●Authentication Type：There are three kinds of authentication of
BLW-54CW3 wireless Router. After selecting the authentication mode, it
has to cooperate with the encryption type. The settings of authentication
on the destination network must be the same with BLW-54CW3.
◆Open System –If enabling this mode, there is no need authentication
toaccess AP or wireless NIC.
◆Shared Key –Only those who are sharing the same key with the AP
can connect with it.
◆A u t o –B LW-54C W3 w i l l a u t o m a t i c a l l y a p p l y t h e p r o p e r
authentication type according to your network environment.
●Preamble Type：Preamble defines the length of the CRC block (Cyclic
Redundancy Check is a common technique for detecting data
transmission errors) for communication between the Access Point and
the roaming wireless device. Long Preamble is the default setting. Note:
High network traffic areas should use the shorter preamble type. You can
choose "Long Preamble" or "Short Preamble".
●Broadcast SSID：Enable this function so other devices can connect to
BLW-54CW3 through wireless connection.
Chapter3 Advanced Setup & Configuration
3
5
Advertisement
Table of Contents
