Enabling The Headset Memory Mode; Selecting The Correct Headset For Electronic Hookswitch - Polycom VVX 500 Owner's Manual

9. Tap save to accept changes.
10. Press and

Enabling the Headset Memory Mode

This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press .
2. Select Settings > Basic > Preferences > Headset > Headset Memory
3. Tap Enabled to change the setting.
4. Press to return to the idle display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
o
activate Headset Memory Mode:
T
Press twice.
The flashing headset icon on the graphic display or a flashing headset key indi-
cates that the headset mode is activated. If the
analog headset is detected by the phone and is in use. If the
blue a USB headset is detected and is in use. If both an analog and USB head-
set is in the phone, the phone will choose the USB by default. Tapping Answer
to receive a call, will now connect to your headset automatically.

Selecting the Correct Headset for Electronic Hookswitch

This feature allows you to answer your phone when you are using a headset.
to return to the idle display.
42
glows green, an
is glowing