Disabling Automatic Answer:
Inbound Caller ID
Caller ID Name and Number are presented on the screen of your phone
with each inbound call. If you are using a Simultaneous hunt group, the
name of that hunt group will also be passed through to the display of your-
phone.
Changes to your Outbound Caller ID Name need to be
made through customer service.
Note
Ending Calls
To end a call:
Do one of the following:
• If you are using the handset, Tap
• If you are using a headset, press .
• If you are using the speakerphone, press.
• Tap
Forwarding Calls
You can configure your phone so that all incoming calls are forwarded to
another party (refer to Static Forwarding). You can also forward calls
while your phone rings (refer to Dynamic Forwarding).
All incoming calls can be forwarded to voicemail while Do Not Disturb is
enabled on your phone.
Static Forwarding
Static Forwarding allows you to send ALL incoming calls to another
phone number or extension. When Static Forwarding is enabled, your
phone will not ring.
1.
Press
> Settings> Basic> Preferences> Auto
Answer
2.
Highlight and Select Auto Answer SIP Calls
3.
Tap No
4.
Tap Save
in the display.
16
or replace the handset.