Table of Contents
Advertisement
SmartNode 4660 & 4670 User Manual
Port
Expansion port
G.SHDSL, ADSL, EFM or
SFP
Console
12V DC, 1.0A
Reset
LED
Pwr
Run
ETH 0/0 -0/3
Green LED
CodesSmartNode 4660 and 4670 Series Rear Panels
Table 6. SN4670 rear panel ports
G.SHDSL
•
RJ-45 connector
•
Provides up to 24 Mbps (G.SHDSL.bis, ATM) symmetrical throughput
•
Supports multiple PVC and DSLAM interoperability
ADSL
•
RJ-45 connector
Provides up to 24 Mbps (ADSL2+, ATM) symmetrical throughput
•
Supports multiple PVC and DSLAM interoperability
•
EFM
RJ-45 connector
•
Depending on model, supporting 4-wire (2pair) or 8-wire (4pair) EFM con-
•
nection
•
IEEE 802.3 G.998.2 compliant.
SFP
•
SFP tray supporting various Fiber to ethernet converter modules. See
http://www.patton.com/products/sfpmodules.asp for tested modules.
Used for service and maintenance, the Console port (see
45 connector, connects the SmartNode to a serial terminal such as a PC or ASCII
terminal (also called a dumb terminal).
The SmartNode has a 12V DC 1A power input (see
The reset button (see
Figure
•
Restart the unit with the current startup configuration—Press (for less than 1
second) and release the Reset button to restart the unit with the current star-
tup configuration.
•
Restart the unit with factory default configuration—Press the Reset button for
5 seconds until the Power LED starts blinking to restart the unit with factory
default configuration.
•
Restart the unit in bootloader mode (to be used only by trained SmartNode
4660 technicians)—Starting with the unit powered off, press and hold the
Reset button as you apply power to the unit. Release the Reset button when
the Power LED starts blinking so the unit will enter bootloader mode.
Table 7. SN4670 LED Definitions
Is on after 10sec when power is applied to the unit. Flashes once per sec-
ond during boot (startup).
When lit, the unit is in normal operation.
Flashes when data is received or transmitted at the corresponding Ethernet
port.
Description
2) has three functions:
Definitions
1 • General Information
Figure
2), an RS-232 RJ-
Figure
2).
20
Advertisement
Table of Contents
