Table of Contents
Advertisement
OnSite Model 3210 User Manual
•
EUI stands for external 100–240V AC universal input power supply (see
Ports descriptions
The OnSite 3210 Series rear-panel ports are described in
Port
10/100 Ethernet
ETH 0/0 (WAN) &
ETH 0/1 (LAN)
G.SHDSL
Power
Console
Note
OnSite Model 3210 Series overview
Table 2. Rear panel ports
Location
Rear panel RJ-45 connectors (see
an Ethernet device (e.g., a cable or DSL modem, LAN hub or switch).
Rear panel Provides up to 5.7 Mbps symmetrical throughput, supporting ATM
QoS. Supports multiple PVC and DSLAM interoperability.
The DSL LEDs are located on either side of the DSL port. ACT (when lit
or blinking) shows activity, and Link (when lit) shoes that the DSL port is
connected.
Rear panel The router is available in a DC or AC power input version (see
on page 18), labeled as follows:
AC version (Internal power supply): 100–240 VAC, 50/60 Hz, 1 A
DC version: +12 V, 1 A or +5 VDC 1 A
Front panel Used for service and maintenance, the Console port (see
RS-232 RJ-45 connector, connects the router to a serial terminal such
as a PC or ASCII terminal (also called a dumb terminal).
IPLink 3210
u t
R o
P N
k V
L i n
I P
o le
n s
C o
1
e t
E n
0
e t
E n
Figure 4. OnSite 3210 Series front panels
For LED descriptions, refer to chapter 8,
ing"
on page 87.
table
2.
Description
on page 18) that connect the router to
figure 2
Enet 0
Enet 1
e r
"LEDs status and monitor-
1 • General information
figure
3)
figure 4
IPLink VPN Router
Console
Console port
figure 3
), an
19
Advertisement
Table of Contents
