—This is a Class A device and is not intended nor approved for use in an industrial or residential environment. Sales Office: +1 (301) 975-1000 Part Number: 07MOS3300-QS, Rev. B Technical Support: +1 (301) 975-1007 Revised: May 18, 2018 E-mail: support@patton.com WWW: www.patton.com...
Page 2
This device contains no user serviceable parts. This device can only be repaired by qualified service personnel. WARNING This device is NOT intended nor approved for connection to the PSTN. It is intended only for connection to customer premise equipment. WARNING OnSite OS3300 Quick Start Guide...
Observe the signal/pin relationship on the OS3300’s DSL interface jack for each pair in figure 2 on page 4. Figure 4 on page 4 shows the proper way to wire a cable with a RJ-45 jack on one end and four RJ-11jacks on the other. OnSite OS3300 Quick Start Guide...
Page 4
Figure 2. OS3300 (RJ-45) twisted pair DSL interface Figure 3. OnSite Pinout for two devices Figure 4. RJ-45 to RJ-11 cable OnSite OS3300 Quick Start Guide...
The EFM Router does not have a power switch; it powers on once the device is plugged in. The power connection is made via the barrel jack on the rear panel of the OS3300. No configuration is necessary for the power supply. OnSite OS3300 Quick Start Guide...
Page 6
On page 9 you can see a sample configuration for easy con- nections to Central EFM DSLAM or EFM Peer Router. 3.1 Connect with SSH Connect the Ethernet cable. Connect the power supply. OnSite OS3300 Quick Start Guide...
Page 7
This will set the EFM Router as CO or CPE. CO is typically used at the CO and CPE: network, CPE is typically used at the CPE device or CPE network. node(prt-DSL)# mode {CO|CPE} Please consult support before changing this setting. Annex Type: node~(prt-DSL)[<name>]# annex-type { b-g | a-f } OnSite OS3300 Quick Start Guide...
Page 8
Service Mode: will default to the maximum number of wires available on your version of the OnSite. OS3301 (2-wire); OS3302 (4-wire); OS3304 (8-wire). node~(prt-DSL)[0/0]# service-mode { 2-wire | 4-wire | 6- wire | 8-wire } OnSite OS3300 Quick Start Guide...
Page 9
DEFAULT method 1 CO continue-on-reject console use profile aaa DEFAULT telnet-server use profile aaa DEFAULT shutdown ssh-server use profile aaa DEFAULT no shutdown snmp-server shutdown web-server http use profile aaa DEFAULT no shutdown ntp shutdown OnSite OS3300 Quick Start Guide...
Page 10
Context Bridge An abstract section of the OS3300 EFM Router configuration that is dedicated to the bridging protocol at the CPU layer of the Patton Device. bridge-group LAN no shutdown Bridge Group bind interface ROUTERLAN context switch-group DEFAULT...
Page 11
DEFAULT ETHER- NET_0_1 no shutdown port ethernet 0 2 Port bind switch-group DEFAULT ETHER- NET_0_2 Any physical port of the Patton no shutdown Device port ethernet 0 3 bind switch-group DEFAULT ETHER- NET_0_3 no shutdown port dsl 0 0...
Page 12
These are bound together to offer a highly flexible multi functioning multi-service network device. Figure 8. Sample Configuration Diagram 3.9 Shipping Configuration The OS3300 EFM Router configuration on page 13 is the default factory or shipping configuration. OnSite OS3300 Quick Start Guide...
Page 13
DHCP context bridge Context Bridge An abstract section of the OS3300 EFM Router configuration that is dedicated to the bridging protocol at the CPU layer of the Patton Device. bridge-group LAN bind interface ROUTER Bridge Group no shutdown context switch-group...
0 1 bind switch-group DEFAULT ETHERNET_0_1 no shutdown port ethernet 0 2 bind switch-group Port DEFAULT ETHERNET_0_2 Any physical port of the Patton no shutdown Device port ethernet 0 3 bind switch-group DEFAULT ETHERNET_0_3 no shutdown port dsl 0 0...
Trinity 3.0 Reference Guide available on DSL at www.patton.com/manuals A Customer and Technical Support Toll-Free VoIP support: call sip:support@patton.com with a VoIP SIP phone On DSL support: www.patton.com E-mail support: support@patton.com—answered within 1 business day OnSite OS3300 Quick Start Guide...
(such that the computing equipment and receiver are on different branches). D.0 EC Declaration of Conformity Patton Electronics, Inc declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC relating to elec-...
Need help?
Do you have a question about the OnSite OS3300 and is the answer not in the manual?
Questions and answers