If You Cannot Reach A Destination; Call Waiting (Camp-On); Busy Override - Joining A Call In Progress - Siemens HiPath 3000 Operating Instructions Manual

Step by Step
Consultation
qjf w

If You Cannot Reach a Destination

Call Waiting (Camp-On)

It is important that you reach the called party, but the
number is busy.
n
Lift the handset.
o
Enter the internal station number.
Wait (approx. 5 seconds) until the busy tone is followed
by the ring tone.
The called party can then respond
The called party can prevent automatic call wait-
ing
If this feature is configured (contact the service
personnel), you will hear the ring tone immedi-
ately.

Busy Override - Joining a Call in Progress

This function is only available if it has been configured
by the service technician (contact the service person-
nel).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Press the key. LED flashes. Enter the code.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Override: (station
no. or name)".
You can now start talking.
Making Calls – Convenience Functions
Page 24.
Page 23.
29