Call Forwarding In The Carrier Network And Forwarding Multiple Subscriber Numbers (Msn) (Not For U.s.) - Siemens HiPath 3000 Operating Instructions Manual

Making Calls – Basic Functions
Step by Step
e
or
e
or
14
Deactivating call forwarding:
n
Lift the handset.
re w
Enter the code.
Call Forwarding in the Carrier Network
and Forwarding Multiple Subscriber Num-
bers (MSN) (Not for U.S.)
If this function has been configured (contact the service
personnel), you can forward calls to your assigned
multiple subscriber number (MSN) (DID number)
directly within the carrier network.
For example, you can forward your phone line to your
home phone after business hours.
n
Lift the handset.
qjh
Enter the code.
f g
or Enter the line type you wish to use:
1= immediate, 2 = on no answer, 3 = on busy
o
Enter your DID number.
o w
Enter the destination number (without the external
code).
Deactivating call forwarding:
n
Lift the handset.
rjh
Enter the code.
f g
or Enter the activated call forwarding type.
1= immediate, 2 = on no answer, 3 = on busy
o w
Enter your DID number.
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact the service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.