During A Call; Using Call Waiting; Accepting A Waiting Call (Camp-On) - Siemens HiPath 3000 Operating Instructions Manual

Step by Step
Consultation
Consultation
Consultation

During a Call

Using Call Waiting

Callers can still reach you while you are engaged in an-
other call. A signal alerts you to the waiting call.
You can either ignore or accept the waiting call.
When you accept the waiting call, you can either end
the first call or place it on hold and resume the call later
on.
You can also bar call waiting or the call waiting tone
Page 24.

Accepting a Waiting Call (Camp-On)

Precondition: You are engaged in a phone call and hear
a tone (every six seconds).
Ending the first call and answering the waiting call:
t
Replace the handset. Your telephone rings.
n
Answer the second call. Lift the handset.
Placing the first call on hold and answering the sec-
ond call:
Press the key. LED flashes. Enter the code.
qii
You are connected to the call waiting party immediately.
The first party is placed on hold.
Ending the second call and resuming the first one:
Press this key and wait two seconds.
or (depending on the configuration)
Press the key twice.
Making Calls – Convenience Functions
23