Using Other Functions/Services
Step by Step
42
•
Lock and unlock all phones,
code:
66/#66
*
•
Save PIN,
code:
93
*
•
Send a message,
code:
68/#68
*
•
Group ringing, code:
•
Group call, code:
•
Suppress caller ID,
code:
86/#86
*
•
Open door, code:
•
Door opener on/off, code:
•
Control relay, code
•
Do not disturb, code:
•
Speed-dialing, code:
•
Associated service, code:
Precondition: You have a telephone that uses tone di-
aling (DTMF dialing) or you can switch your telephone
to tone dialing. The telephone is not connected to the
system.
o
Set up a call to the system. Enter the station number
(contact the service personnel).
o
Wait for a continuous tone (if necessary switch the tel-
ephone to tone dialing), then enter the internal number
that has been assigned to you and the associated PIN.
r
Enter the code (necessary only if programmed in the
system).
o
Wait for a dial tone and then enter the code, such as
97 for Do not disturb on. Make other inputs as
*
necessary; (refer to the operating instructions for pulse
and DTMF telephones).
or
o
Dial the external number.
You can only execute one function at a time, or
set up only one outgoing connection.
The connection is immediately released after
successful activation of a function.
In the case of an external-external call, the
connection is released as soon as either of the
parties ends the call.
Page 35
Page 36
Page 37
81/#81
*
85/#85
Page 46
*
Page 33
61
Page 18
*
89/#89
*
90/#90
Page 44
*
97/#97
*
7
Page 19
*
83
*
Page 47
Page 19
Page 33
Page 41