Thank you for choosing the Cisco SPA 300 Series IP Phone. This guide describes how to
physically install your Cisco SPA 300 Series IP Phone and how to perform some basic tasks.
Before you begin
Make sure that your internet telephony service is configured and active. For example, your phone
will be registered to a device, such as a Cisco Unified Communications 500 Series or a third-party
application server, that provides your phone service.
Getting to know your Cisco SPA 301 IP Phone
0800 040 8888
v1 - 06/13
Pick up to place or answer a call.
The LED colour indicates the phone or
message status. A solid red LED indicates that
you have a new voicemail message.
Push to turn ringer on or off.
Press to access voicemail (this must be set up
by your phone administrator).
Press to place a call on hold and open another
Press to redial the last number called.
Press repeatedly to increase the volume of
the handset when the receiver is off the hook,
or the ringer volume when the receiver is in
Use to dial phone numbers.
working with daisy