Close Batch - VeriFone TRANZ 460 Reference Manual

Close Batch

6 - 12
FDC Retail/Debit Purchasing Card Reference Manual
Follow this procedure to close a batch of transactions with the host. This will
clear the batch from the terminal's memory and enable it to store future trans-
actions.
Display
1. READY **nnn**
CLOSE BATCH
2. ENTER PASSWORD
******
NO TRANSACTIONS
3. ENTER AMOUNT
PRINTING...
4. REPORTING? Y/N
5. CLOSING > > > >
CLOSING > > > >
6. <host response>
7. READY **nnn**
TRANZ 460 Terminal
Response
Press the [9] key labeled CLOSE.
Enter the manager password if required,
then press [ENTER]. The display echoes
each keypress with an asterisk.
There is no batch.
This prompt only appears if the auto-insert
totals option is set to OFF. Enter the termi-
nal total amount without the decimal, then
press [ENTER].
If the Auto Report option is ON, the printer
prints the Detail and Terminal Totals reports.
Enter [9] for "Y" print the transactions in the
batch, or [6] for "N" to continue with the
Close.
The terminal is formally closing the batch
with the host computer. The display alter-
nates messages indicating it is transmitting
and receiving.
Press [CLEAR] to return to the idle prompt.
The terminal returns to the idle prompt indi-
cating it is ready to proceed with the next
transaction.