VeriFone TRANZ 460 Reference Manual page 84

AVS ADDRESS
AVS ZIP
BANKCARD ADDRESS
9999999999999999999999
BATCH IS FULL
CALL CENTER
CARD=1 OP=2
CARD RANGE INFO
ACCT RANGE ITEM?
nn-LOW?
nn-HIGH?
nn-CARD TYPE?
nn-CARD ABBREV?
nn-TERMS? Y/N
nn-DES CODE 0/2/4
nn-AVS ? Y/N
nn-CUST CODE? Y/N
CLEAR BATCH
CLEAR? Y/N
CLOSE BATCH
CLOSING > > > >
COMMUNICATING
D - 2
FDC Retail/Debit Purchasing Card Reference Manual
Enter the cardholder's street address, then press [ENTER].
Enter the cardholder's ZIP code, then press [ENTER].
Prompt that appears if you select "Y" at the ENABLE DDOV? prompt. Press
[ENTER] to accept the current address, or key in a new host address, up to
20 alphanumeric characters, then press [ENTER].
Indicates that data capture memory is full and no more transactions can be
stored in memory until data capture file is cleared.
Operator should call the credit authorization center voice line.
In a Totals Review function, press "1" to review totals by card type or "2" to
review operator totals. This prompt also appears in the Print Totals Report
function.
Setup Code 2 was entered allowing the operator to enter card range
information.
Note: You must answer ALL prompts. Press [9] or [6] for "Y" and "N"
responses. At the Customer Code, prompt, enter 1 to 25 numeric digits.
Display when Code 9 of the Setup function is selected. Wait for the next
prompt.
Setup function Code 9 allowing the operator to clear the terminal buffer and
return to the setup mode. Press "Y" to continue or "N" to exit the function.
The Close Batch transaction, Key [9], was selected.
Close Batch display when the terminal is closing with the host.
Display when the terminal is sending or receiving data from the download
host.
TRANZ 460 Terminal