Programming The Terminal For Use; Host Information - VeriFone TRANZ 460 Reference Manual

5. Programming the Terminal for Use

Host Information

Check Memory Location 0019 to ensure your terminal is loaded with the
correct software version before you begin programming. Press BLUE + 7,
then enter 0019. The terminal should display " 0019 = FRET462." If
Memory Location 0019 contains data other than this, please contact your
VeriFone representative.
To prepare your terminal for use, you must enter the Setup function key
sequence (BLUE + 4) and Codes 1 through 0 for the selected Setup.
1 = Host Setup
2 = Account Range Tables
3 = Security Setup
4 = Password Setup
5 = Terminal Options
Use this function to store the FDC host telephone numbers and merchant
IDs. The merchant ID should be programmed without a prefix. This appli-
cation displays current data for verification or change. To enter Host Setup:
1. Press BLUE + 4.
2. Key in the manager password.
3. Press the BLUE enter key.
4. Press Code 1.
Note: You may press the [ENTER] key to bypass any field and not disturb
what has already been programmed. If something is already programmed
and you wish to make a change, you must first press [BACKSPACE], then
key in the new data.
Display
HOST INFO
FDR PRIMARY #?
FDR SECOND #?
FDR CLOSE PHONE?
FDR MERCH ID?
TRANZ 460 Terminal
6 = Sale Type Description
7 = Printer Type/PINpad Device Setup
8 = Change Idle Prompt
9 = Clear Batch
0 = Card Type Label
Response
FDC Host primary and secondary phone
numbers and merchant ID number. If you
need to dial "9" first, then pause, enter
"9-XXXXXXX". Each "-" causes a 2-second
delay in dialing.
If this is an FDC "public port" number, add
"LØ" or "XØ" at the end of the telephone
number. For example, if the local "public
port" number is 123-4567, you must key in
"1234567LØ" or "1234567XØ."
5 - 1