Debit Sale - VeriFone TRANZ 460 Reference Manual

Display
PRINTING...
20. READY **nnn**

Debit Sale

Follow these procedures to capture a debit sale transaction.
Display
1. READY **nnn**
SALE
2. ENTER PASSWORD
******
3. CREDIT=0 DEBIT=1
OUT OF PAPER
4. AMOUNT OF SALE ?
5. TAX AMOUNT
6. SWIPE CARD
7. PROCESSING
8. WAITING ON PIN
9. WAITING ON PIN
10. OPERATOR ID
PINpad
Device
SWIPE CARD
TOT. $99999.99
ENTER PIN
PUSH "ENTER"
PROCESSING
TRANZ 460 Terminal
6. Standard Key Operations
Response
If the transaction is approved and the
printer is enabled, the printer prints a
receipt of the transaction.
The terminal returns to the idle prompt
indicating it is ready for the next trans-
action.
Response
Press the [1] key labeled SALE.
Enter the manager password if re-
quired, then press [ENTER]. The dis-
play echoes each keypress with an as-
terisk.
Press "1" for a debit transaction.
Press [CLEAR] to return to the idle
prompt.
Enter the amount of the sale without
the decimal, then press [ENTER].
Enter the tax amount without a deci-
mal, then press [ENTER]. If TAX
CALC is enabled, the terminal auto-
matically calculates the tax based on
the tax rate. If both are enabled, the
TAX AMOUNT overrides tax calcula-
tion.
If you are using a PINpad 101 device,
swipe the customer's debit card
through the terminal's cardreader.
If you are using a PINpad 201 device,
swipe the debit card through the PIN-
pad unit cardreader.
The PINpad device displays the trans-
action amount.
The customer enters his/her PIN on
the PINpad device and presses
[ENTER].
Enter the 4-digit operator ID, then
press [ENTER], or press [ENTER] to
bypass this prompt.
6 - 3