MAGIMIX C 3200 User Manual page 17

GRATING / SLICING DISCS
We recommend you use the discs in the midi bowl.
1
Lower the midi bowl into the main bowl.
Slide the disc support onto the motor
shaft.
4
Position your chosen disc so that the
relevant function and thickness code is
uppermost.
For nonreversible discs*, make sure
you put them the right way up. The
central plastic part should be pointing
downwards.
* depending on the model
After grating or slicing, you will be left with tiny stubs of fruit or vegetables on
your discs. This is entirely normal and ensures a flawless end result.
16
2 3
Slicing/grater discs:
each disc is engraved with a code, e.g.
R/G4: 4mm grater
E/S2: 2mm slicer
5
Slot the disc onto the disc support.
Turn it anticlockwise until it locks into
place (a two-stage process).
W A R N I N G
• Always handle the discs with caution,
as the blades are extremely sharp.
• Never insert a foreign object - or
your fingers - into the feed tube.
Always use the pusher designed for
that purpose.
• Never exceed the recommended
quantities (p. 7).