Machine Identification - Pitney Bowes OfficeRight DI380 Operator's Manual

1 • Introduction

Machine Identification

1
2
5
9
8
Sheet Feeder 1 This feeder is intended for feeding material
1
that requires folding.
In addition, Sheet Feeder 1 can be set to 'Manual Feed'. In
this mode, stapled sets of up to 5 sheets may be run. The
machine waits for each set to be manually fed into Sheet
Feeder 1 before folding and inserting the set automatically.
See the Specifications section of this guide for full details of
the sets possible.
Sheet Feeder 2 For feeding material that requires folding. Its
2
functions are similar to Sheet Feeder 1 but 'Manual Feed' is
NOT available from this feeder.
1-4
6
11
3
4
10
12
7
SDC639A