Pitney Bowes OfficeRight DI380 Operator's Manual page 30

2 • Operation
Fold B
Select the size of the second fold
required.
In a similar way to fold A, the
machine will be suggesting the
correct dimension for the fold.
If you want to change the
'standard' setting, press Change (+/-) until the length of fold required
is displayed. The symbol | –––– | shows the fold panel you are
adjusting.
When the setting is correct, press Next (►) to advance to the next
setting...
If you are programming an inserting job, the setting Envelope Depth
will now appear. If you are programming a fold only job, the display
will jump straight to the 'Confirming the Job Setup' section on page
2-20.
Envelope Depth
Select the depth of your
envelopes (in millimetres).
Again, you can use the scale on
the front cover to measure the
depth of your envelopes.
Press Change (+/-) until the
correct dimension is displayed.
When the envelope depth is set as required, press Next (►) to
advance to the next setting...
2-18 SDC639A