4 • Reference
Removal & Replacement of the Sheet Feeder Trays
To remove...
Lift the rear of the tray slightly
and pull it straight outwards from
the machine.
Note:
If the tray is loaded, gently hold
the material in place to prevent
it sliding forward as the tray is
removed.
To replace...
Place the tray into its location guides in the side frames. Lift the
rear of the tray slightly and push it into the machine. The tray will
automatically drop into its correct location.
Removal & Replacement of the Fold Plates
To remove...
Pull the two catches on the
underside of the plate outwards
to release them. Pull the plate
straight out from the machine.
To replace...
Pull the two catches on the
underside of the plate outwards
to release them. Slide the plate into its location guides and release
the catches to lock the plate in position.
Removal & Replacement of the Insert Tray
To remove...
Pull the insert tray straight
outwards from the machine.
To replace...
Slide the tray into its location
guides and push until it 'clicks'
into place.
4-2
SDC639A